The Camera Box
Brands
6 items found in The Camera Box
Mackie Onyx Series Producer 2-2 Audio Interface
- $119.99
- Two boutique-quality Onyx mic preamps with class-leading fidelity and dynamic range XLR/TRS combo inputs accept mic, line and instrument sources 48v Phantom Power for use with studio condenser mics
- High-resolution 2 in x 2 out 24-Bit/192kHz recording plus MIDI I/O Zero-latency direct monitoring of analog inputs Dedicated outputs for connecting studio monitors Powerful headphone output
- Bus-powered for easy mobile recording with no power adapter needed USB 2.0 connectivity for fast transfer speed and low latency Built-Like-A-Tank design to survive day-to-day abuse
- Tracktion Music Production Software included
Sold out
Mackie Producer Bundle USB Audio With CR3-X Speakers, Vocal and Condenser Microphones, Headphones, and Podcast Boom Arm Mic Stand
- $409.95
Mackie Producer Bundle USB Audio With CR3-X Speakers, Vocal and Condenser Microphones, Headphones, and Podcast Boom Arm Mic Stand
Pro Audio Accessory
- $409.95
Start your home studio with the Mackie Producer Bundle, a handy 2-channel recording solution including a slew of Mackie gear—the Onyx Producer 2·2 USB audio/MIDI interface, the MC-100 headphones, the EM-91C large-diaphragm condenser mic, the EM-89D dynamic handheld vocal mic, and two XLR cables.
Getting set up is easy: connect the interface to your computer via USB, plug the microphones into the interface's XLR inputs, and hook up the headphones with the supplied 1/4" adapter. Record vocals and instruments at up to 24-bit / 192 kHz resolution, interface your MIDI equipment, and use the included software bundle to create quality mixes in the comfort of your own home.
The pair consists of one passive speaker and one powered speaker that connects with an included speaker cable. Each monitor incorporates a custom-tuned rear port to smoothly extend the low end and a specially designed waveguide for clarity and proper dispersion of high frequencies.
With plenty of I/O provided, the CR3-X can accept a feed from your audio interface, computer soundcard, or mobile device while pumping out your mix to the drivers or your favorite headphones.
The CR3-X features a download for ProTools | First and The Musician's Collection plug-in package including 23 high-quality plug-ins with BBD Delay, Eleven Lite, the 304E EQ, and the 304C Compressor.
With 360° of rotational adjustment and an internal XLR cable, the Gator Cases Frameworks Desk-Mounted Broadcast/Podcast Boom Arm Mic Stand is designed for a smooth and easy microphone positioning in radio, broadcast, voiceover, and podcast production applications.
The stand easily clamps to a desk or table and features a spring-loaded articulating boom arm that provides up to 38.5" of extension. The steel construction and metal springs ensure stable operation and toughness while the black powder-coat finish protects the stand against scratches.
Here is what you get:
- Mackie Onyx Producer 2·2 USB Audio/MIDI Interface
- Serial Number for Download of Pro Tools | First and Waveform OEM
- Limited 1-Year Warranty
- Mackie EM-89D EleMent Series Dynamic Vocal Microphone
- Mic Clip
- XLR Cable
- Zipper Pouch
- Limited 1-Year Warranty
- Mackie EM-91C EleMent Series Large-Diaphragm Condenser Microphone
- Shockmount
- XLR Cable
- Limited 1-Year Warranty
- MC-100 Headphones
- 1/4" Headphone Adapter
- Mackie CR3-X Creative Reference Series 3" Multimedia Monitors (Pair)
- 3.5mm to Stereo RCA Cable
- 3.5mm to 3.5mm Cable for Connecting Smartphone to Monitor
- Speaker to Speaker Cable
- Limited 1-Year Warranty
Product highlights:
- Onyx Producer 2·2 USB Interface
- MC-100 Headphones with 1/4" Adapter
- EM-91C Large-Diaphragm Condenser Mic
- EM-89D Handheld Dynamic Vocal Mic
- All-Wood Cabinet
- 50W Amplifier
- 0.75" Silk Dome Tweeter
- 3" Polypropylene-Coated Woofer
- Professional studio-quality sound
- Front-facing headphone jack auto-defeats speaker output.
- Includes Connection Cables
*Gator Cases Frameworks Desk-Mounted:
- 360° of Rotational Adjustment
- Internal XLR Cable for Clean Look
- Ideal for Broadcasts and Podcasts
- Spring-Loaded Articulating Boom Arm
- Clamps to a desk, table, or surface up to 2.2" thick
- Sturdy steel construction with metal coil springs
- Durable black powder-coat finish
- Holds one microphone weighing up to 2.6 pounds
Mackie Onyx Producer 2·2 USB Audio/MIDI Interface Specs
| Channels of I/O |
Analog: 2 Inputs / 2 Outputs at 192 kHz |
| Max Sample Rate/Resolution | 192 kHz / 24-Bit |
| Display and Indicators |
2 x LEDs (Clip, Signal) 1 x LED (Host Connection) 1 x LED (MIDI) |
| Host Connection | 1 x USB Type-B (USB 2.0) |
| Analog I/O |
2 x Combo XLR-1/4" TRS Balanced Mic Input 1 x 1/4" TRS Unbalanced Headphone Output 2 x 1/4" TRS Balanced Monitor Output |
| Phantom Power | +48 V |
| Digital I/O | None |
| MIDI I/O |
1 x 5-Pin MIDI In 1 x 5-Pin MIDI Out |
| Memory Card Slot | None |
| Frequency Response |
Inputs, Outputs: 20 Hz to 20 kHz ±0.5 dB (Min Gain) |
| Max Input Level |
Mic Inputs: +11 dBu (Min Gain) Line/Hi-Z Inputs: +24 dBu (Min Gain) |
| Max Output Level |
Monitor Outputs: +10 dBu Headphone Outputs: +10 dBu |
| THD |
Mic Inputs: <0.001% Line/Hi-Z Inputs: <0.005% Monitor Outputs: <0.001% Headphone Outputs: <0.002% |
| EIN |
Mic/Line/Hi-Z Inputs: < -100 dB Monitor Outputs: < -85 dBu Headphone Outputs: < -75 dBu |
| Sample Rates | Up to 192 kHz |
| Bit Depth | Up to 24-Bit |
| Sync Sources | Internal |
| OS Compatibility | macOS Windows |
| Required Hardware | Available USB 2.0 Port |
| Power Requirements | USB Bus-Power |
| Anti-Theft Features | Kensington Security Slot |
| Dimensions | 7.4 x 4.49 x 2.01" / 18.8 x 11.4 x 5.1 cm |
| Weight | 1.4 lb / 0.6 kg |
| Package Weight | 2.065 lb |
| Box Dimensions (LxWxH) | 11.6 x 6.5 x 3.15" |
Mackie EM-89D EleMent Series Dynamic Vocal Microphone Specs
| Form Factor | Handheld / Stand/Boom-Mount |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Dynamic |
| Polar Pattern | Cardioid |
| Orientation | End Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Built-In |
| Frequency Range | 50 Hz to 16 kHz |
| Impedance | 600 Ohms ± 30% at 1 kHz |
| Sensitivity | -52 dBV/Pa at 1 kHz |
| Output Connectors | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
| Number of Conductors | 2 |
| Operating Voltage | Not Specified by Manufacturer |
| Color | Black |
| Mounting | Mic Clip (Included) |
| Dimensions | ø: 2 x L: 7.3" / ø: 5.08 x L: 18.54 cm |
| Weight | 0.66 lb / 0.3 kg |
| Package Weight | 2.545 lb |
| Box Dimensions (LxWxH) | 13 x 10.5 x 5.7" |
Mackie EM-91C EleMent Series Large-Diaphragm Condenser Microphone Specs
| Form Factor | Stand/Boom-Mount |
| Sound Field | Mono |
| Operating Principle | Pressure Gradient |
| Capsule | 1 x Condenser |
| Polar Pattern | Cardioid |
| Orientation | Side Address |
| Circuitry | Solid-State |
| Pad | None |
| High-Pass Filter | None |
| Tone Adjustment | None |
| Indicators | None |
| On-Board Controls | None |
| Windscreen | Built-In |
| Frequency Range | 20 Hz to 18 kHz |
| Maximum SPL | 134 dB SPL (1 kHz, 1% THD) |
| Impedance | 150 Ohms ± 30% at 1 kHz |
| Sensitivity | -30 dBV/Pa at 1 kHz |
| Signal-to-Noise Ratio | 78 dB |
| Equivalent Noise Level | 16 dB A-Weighted |
| Output Connectors | 1 x XLR 3-Pin Male (on Mic) |
| Headphone Connector | None |
| Number of Conductors | 2 |
| Operating Voltage | 48 V |
| Color | Black |
| Mounting | Shockmount (with Included Hardware) |
| Dimensions | ø: 1.9 x L: 6.1" / ø: 4.83 x L: 15.49 cm |
| Weight | 0.46 lb / 0.21 kg |
| Package Weight | 1.7 lb |
| Box Dimensions (LxWxH) | 13 x 10.5 x 5.7" |
Mackie CR3-X Specs
| Studio Monitor | |
|---|---|
| Monitor Type | Active 2-Way |
| Enclosure | Bass-Reflex |
| Power Rating | 50 W Peak |
| Drivers | LF Driver: 1 x 3" / 7.62 cm Polypropylene Cone HF Driver: 1 x 0.75" / 1.91 cm Silk Dome |
| Amplification | 1 x Full-Range Amplifier: Class-D50 W Peak |
| Performance | |
|---|---|
| Frequency Range | 70 Hz to 20 kHz (at -10 dB) 80 Hz to 20 kHz (at -3 dB) |
| Maximum-Sound Pressure Level (SPL) | 97 dB |
| Phase Adjustment | None |
| Signal Processing | |
|---|---|
| EQ | None |
| Filters | None |
| Parametric EQ | None |
| Crossover | |
|---|---|
| Crossover Frequency | 3 kHz |
| Connectivity | |
|---|---|
| I/O | 2 x 1/4" TRS Balanced/Unbalanced Female Analog Input 1 x 2RCA Unbalanced Female Analog Input 1 x 1/8" / 3.5 mm TRS Unbalanced Female Analog Input 2 x Push Terminal Unbalanced Female Analog Output 1 x 1/8" / 3.5 mm TRS Unbalanced Female Analog Output |
| Power | |
|---|---|
| AC Input Power | 100 to 240 VAC, 50/60 Hz |
| Power Consumption | 60 W |
| Environmental | |
|---|---|
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| General | |
|---|---|
| Enclosure Material | MDF |
| Mounting Points | None |
| Dimensions (W x H x D) | 5.5 x 8.1 x 7.1" / 14 x 20.6 x 18 cm (Each) |
| Weight | 7.8 lb / 3.5 kg (Pair) |
| Packaging Info | |
|---|---|
| Package Weight | 9.38 lb |
| Box Dimensions (LxWxH) | 15.6 x 10.3 x 8" |
Gator Cases GFWMICBCBM1000 Specs
Pentax 20x60 SP WP Waterproof Binocular - 65874
- $249.00
- Large Objective lens elements provide maximum light gathering capabilities
- Ideal for low-light conditions
- Multilayer coatings assure the maximum light transmission through the binocular
- Specialized protective Coating repels dust, water & grease to keep Optics clean
Description
The Pentax SP 20 x 60mm waterproof binoculars are a part of their s series lineup. They are superior quality, full-sized binoculars that are ideal for the widest range of lighting and weather conditions. Large objective lenses incorporated in the design allow for contrast-rich, bright viewing under all light conditions.
Part # 65874
PolarPro Polarizer Glass Filter-for GoPro Hero4 and Hero3 Plus
Photography
- $29.99
- $9.99
- Fits Hero4 and Hero3+ 40M housing, Hero, Hero+, and Hero+ LCD cameras
- Reduces glare for capturing the best quality images and video possible
- Enhances contrast and color saturation
- HD Glass ensures razor sharp image clarity
- 5 Year warranty with PolarPro support (US based)
Description
Redline Extra Left Side Handle for 7518-3 tripod
- $41.00
- $29.99
- Shipping
· Shipping charges are automatically calculated for orders shipped within the Continental USA.
· Orders shipped within the Continental USA are shipped via UPS Ground unless otherwise specified. We do offer other UPS services like Next Day Service as well as Two Day Rush Delivery Service.
· Orders shipped to an international destination or to a USA territory are shipped via United States Postal Service (USPS) Insured or Express.
· We do not take responsibility for the loss of packages shipped via USPS. However, we will make sure to take care of lost package claims.
· Most orders received prior to 2:00 P.M. are shipped within the same business day.