Product Filter
Brands

37 items found in slik

Sold out

Slik Pro CF-633 Tripod (Black)
  • $269.95
Quick View

Slik Pro CF-633 Tripod (Black)

Camera Accessories

  • $269.95

  • Reversible, Rapid Column
  • 3-Position Leg Angle Locks
  • Carbon Fiber Legs
  • Leg Sections: 3, Weight: 2.1 lb
  • Folded Length: 21.3"
  • Max Height: 64.2", Min Height: 4.9"
  • Reversible 1/4"-20 and 3/8"-16 Mount

The SLIK Pro CF-633 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 6.6 lb and measures 21.3" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet help to enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 4.9". The SLIK Pro CF-633 Tripod provides a maximum height of 48.8" and 64.2" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.

Full Product Details

Sold out

SLIK Pro CF-634 Carbon Pro Carbon Fiber Tripod, Black (611-895)
  • $269.95
Quick View

SLIK Pro CF-634 Carbon Pro Carbon Fiber Tripod, Black (611-895)

Photography

  • $269.95

  • 62.6 in. Maximum Height
  • Lightweight Carbon fiber
  • Compact 18.7 in. Folded length
  • Reversible column for low-angle shooting
  • 6.6 lb Load capacity, weighs only 2.0 lb

The SLIK Pro cf-634 weighs just 2 lbs. Making it an easy backpacking companion. It extends to a height of 62.5 inches and folds down to a compact 18.7 inches for travel. This tripod handles up to 6.6 lbs easily. Use it with High-end mirrorless cameras or professional camera bodies with a variety of lenses. All 600 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber. The legs also feature a.R.S (anti-rotational system) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other.

Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.

Full Product Details

Sold out

Slik Pro CF-635 5 Section Carbon Fiber Tripod (Black)
  • $249.95
Quick View

Slik Pro CF-635 5 Section Carbon Fiber Tripod (Black)

Camera Accessories

  • $249.95

  • Carbon Fiber Legs
  • Twist Locks, Rubber Feet
  • 3-Position Leg Angle Locks
  • Reversible, Rapid Column
  • Reversible 1/4"-20 and 3/8"-16 Mount

The SLIK Pro CF-635 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 6.6 lb and measures 14.6" when folded. Each of its 5-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet help to enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 3.5". The SLIK Pro CF-635 Tripod provides a maximum height of 44.1" and 51.6" with the column fully raised.

Full Product Details

Sold out

SLIK Pro CF-733 Carbon Fiber Tripod with Slik Ball Head & Quick Release Plate
  • $306.22
Quick View

SLIK Pro CF-733 Carbon Fiber Tripod with Slik Ball Head & Quick Release Plate

Photography

  • $364.90
  • $306.22

The SLIK Pro CF-733 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 11 lb and measures 22.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 8.3". The SLIK Pro CF-734 Tripod provides a maximum height of 52" and 65.9" with the column fully raised.

Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

The SLIK PBH-535AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 11 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

*Slik Pro CF-733 Tripod (Black):
  • Carbon Fiber Legs
  • 3-Position Leg Angle Locks
  • Reversible, Rapid Column
  • Reversible 1/4"-20 and 3/8"-16 Mount
  • Twist Locks, Interchangeable Rubber Feet
*Slik PBH-535AS Ball Head with 6507 Quick Release Plate:
  • Non-Slip Surface
  • Built-In Bubble Level
  • 6507 Quick Release Plate
  • Aluminum-Alloy Construction
  • 1/4"-20 Folding-Wing Thumb Screw Mount
  • Arca-Type Compatible Clamp with Cam Lock
  • Compatible with tripods or support systems that feature a 3/8"-16 mount
  • Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
  • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
  • The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
  • Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
  • Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
  • Secondary locking knob with knurled surface allows the head to rotate 360°
Slik CF-733 Specs
General
Load Capacity 11 lb / 4.99 kg
Maximum Working Height 65.9" / 167.4 cm
Max Height without Center Column 52" / 132.08 cm
Minimum Working Height 8.3" / 21.1 cm
Folded Length 22.6" / 57.40 cm
Head Mount Type None
Weight 2.9 lb / 1.32 kg
Materials Carbon Fiber
Bubble Level No
Legs
Leg Lock Type Twist-Lock
Leg Positions 3 Positions
Independent Leg Spread Yes
Leg Sections 3
Feet Features Rubber
Center Column
Center Column Features Ballast Hook
Center Column Extension Type Rapid
Packaging Info
Package Weight 5.3 lb
Box Dimensions (LxWxH) 29 x 5.5 x 5.5"
Slik PBH-535AS Specs
Head
Head Type Ball Head
Base Mount 3/8"-16 Female & 1/4"-20 with Bushing
Camera Mounting Screw 1/4"-20 Male
Number of Bubble Levels 1
Friction Control Yes
Independent Pan Lock Yes
Pan & Tilt Range
Vertical Tilt 90°
Panning Range 360°
General
Load Capacity 11.0 lb / 4.99 kg
Maximum / Minimum Working Height 3.8" / 9.7 cm
Materials Aluminum Alloy
Weight 12.8 oz / 362.88 g
Packaging Info
Package Weight 1.1 lb
Box Dimensions (LxWxH) 5.54 x 4 x 4"

    Full Product Details

    Sold out

    Slik Pro CF-733 Tripod (Black)
    • $289.95
    Quick View

    Slik Pro CF-733 Tripod (Black)

    Camera Accessories

    • $289.95

    • Carbon Fiber Legs
    • 3-Position Leg Angle Locks
    • Reversible, Rapid Column
    • Reversible 1/4"-20 and 3/8"-16 Mount
    • Twist Locks, Interchangeable Rubber Feet

    The SLIK Pro CF-733 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 11 lb and measures 22.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 8.3". The SLIK Pro CF-734 Tripod provides a maximum height of 52" and 65.9" with the column fully raised.

    Full Product Details

    Sold out

    SLIK Pro CF-734 Carbon Fiber Tripod Black (615-925)
    • $309.95
    Quick View

    SLIK Pro CF-734 Carbon Fiber Tripod Black (615-925)

    Photography

    • $309.95

    • 64.9 in. Maximum Height
    • Lightweight Carbon fiber
    • Compact 18.7 in. Folded length
    • Reversible column for low-angle shooting
    • 11. Lb Load capacity, weighs only 2.9 lb

    The SLIK Pro cf-734 is a full-size tripod extending to 64.9 inches and folds down to a compact 18.7 inches. Though lightweight (2.9lbs) the cf-734 handles up to 11 lbs. This makes it a great hiking and backpacking tripod to match with advanced enthusiast and professional camera bodies and/or heavy lenses in the field. All 700 series carbon fiber tripods have legs made up of carbon fiber material that is actually comprised of 8 layers of inter-woven carbon strands that are then bonded together in a sealed, high-pressure furnace producing strong, light weight carbon fiber.

    The legs also feature a.R.S (anti-rotational system) is designed into the leg locks and do not allow the individual legs sections to rotate inside each other. Each leg also has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. The four leg sections are secured and loosened with twist locks. Because the legs are non-rotating, you can unlock all of a leg’s stages at once by twisting the three large rubber grips with one hand. This enables fast setup.

    Full Product Details

    Sold out

    Slik Pro CF-734 Tripod Black with PBH-535AS Ball Head & 6507 Quick Release Plate
    • $319.90
    Quick View

    Slik Pro CF-734 Tripod Black with PBH-535AS Ball Head & 6507 Quick Release Plate

    Photography

    • $384.90
    • $319.90

    The SLIK Pro CF-734 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 11 lb and measures 18.7" when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 7.1". The SLIK Pro CF-734 Tripod provides a maximum height of 52.2" and 65" with the column fully raised.
     
    The SLIK PBH-535AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 11 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.
    Here is what you get:
    • Slik Pro CF-734 Tripod (Black)
    • Limited 3-Year Warranty
    Product highlights:
    • Load Capacity: 11 lb
    • Max Height: 65", Min Height: 7.1"
    • Folded Length: 18.7"
    • Leg Sections: 4, Weight: 2.9 lb
    *Slik PBH-535AS Ball Head with 6507 Quick Release Plate:
    • Non-Slip Surface
    • Built-In Bubble Level
    • 6507 Quick Release Plate
    • Aluminum-Alloy Construction
    • 1/4"-20 Folding-Wing Thumb Screw Mount
    • Arca-Type Compatible Clamp with Cam Lock
    • Compatible with tripods or support systems that feature a 3/8"-16 mount
    • Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
    • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
    • The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
    • Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
    • Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
    • Secondary locking knob with knurled surface allows the head to rotate 360°
    Slik CF-734 Specs
    General
    Load Capacity 11 lb / 4.99 kg
    Maximum Working Height 65" / 165.1 cm
    Max Height without Center Column 52.2" / 132.59 cm
    Minimum Working Height 7.1" / 18 cm
    Folded Length 18.7" / 47.50 cm
    Head Mount Type None
    Weight 2.9 lb / 1.32 kg
    Materials Carbon Fiber
    Bubble Level No
    Legs
    Leg Lock Type Twist Lock
    Leg Positions 3 Positions
    Independent Leg Spread Yes
    Leg Sections 4
    Feet Features Rubber
    Center Column
    Center Column Features Ballast Hook
    Center Column Extension Type Rapid
    Packaging Info
    Package Weight 6.5 lb
    Box Dimensions (LxWxH) 29 x 5.5 x 5.5"
    Slik PBH-535AS Specs
    Head
    Head Type Ball Head
    Base Mount 3/8"-16 Female & 1/4"-20 with Bushing
    Camera Mounting Screw 1/4"-20 Male
    Number of Bubble Levels 1
    Friction Control Yes
    Independent Pan Lock Yes
    Pan & Tilt Range
    Vertical Tilt 90°
    Panning Range 360°
    General
    Load Capacity 11.0 lb / 4.99 kg
    Maximum / Minimum Working Height 3.8" / 9.7 cm
    Materials Aluminum Alloy
    Weight 12.8 oz / 362.88 g
    Packaging Info
    Package Weight 1.1 lb
    Box Dimensions (LxWxH) 5.54 x 4 x 4"

      Full Product Details

      Sold out

      Slik Pro CF-833 Carbon Fiber Tripod w/ PBH-635AS Ball Head & Quick Release Plate
      • $305.93
      Quick View

      Slik Pro CF-833 Carbon Fiber Tripod w/ PBH-635AS Ball Head & Quick Release Plate

      Photography

      • $414.90
      • $305.93

      The SLIK Pro CF-833 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 23.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 9.3". The SLIK Pro CF-833 Tripod provides a maximum height of 54.5" and 67.3" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

      The SLIK PBH-635AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 13.1 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

      *Slik Pro CF-833 Tripod (Black):
      • Carbon Fiber Legs
      • 3-Position Leg Angle Locks
      • Reversible, Rapid Column
      • Reversible 1/4"-20 and 3/8"-16 Mount
      • Twist Locks, Interchangeable Rubber Feet
      *Slik PBH-635AS Ball Head with 6507 Quick Release Plate:
      • Non-Slip Surface
      • Built-In Bubble Level
      • 6507 Quick Release Plate
      • Aluminum-Alloy Construction
      • 1/4"-20 Folding-Wing Thumb Screw Mount
      • Arca-Type Compatible Clamp with Cam Lock
      • Compatible with tripods or support systems that feature a 3/8"-16 mount
      • Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
      • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
      • The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
      • Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
      • Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
      • Secondary locking knob with knurled surface allows head to rotate 360°
      Slik CF-833 Specs
      General
      Load Capacity 15.4 lb / 6.99 kg
      Maximum Working Height 67.3" / 170.9 cm
      Max Height without Center Column 54.5" / 138.43 cm
      Minimum Working Height 9.3" / 23.6 cm
      Folded Length 23.6" / 59.94 cm
      Head Mount Type None
      Weight 3.4 lb / 1.54 kg
      Materials Carbon Fiber
      Bubble Level No
      Legs
      Leg Lock Type Twist-Lock
      Leg Positions 3 Positions
      Independent Leg Spread Yes
      Leg Sections 3
      Feet Features Rubber
      Center Column
      Center Column Features Ballast Hook
      Center Column Extension Type Rapid
      Packaging Info
      Package Weight 5.7 lb
      Box Dimensions (LxWxH) 29 x 5.5 x 5.5"
      Slik PBH-635AS Specs
      Head
      Head Type Ball Head
      Base Mount 3/8"-16 Female & 1/4"-20 with Bushing
      Camera Mounting Screw 1/4"-20 Male
      Number of Bubble Levels 1
      Friction Control Yes
      Independent Pan Lock Yes
      Pan & Tilt Range
      Vertical Tilt 90°
      Panning Range 360°
      General
      Load Capacity 13.1 lb / 5.94 kg
      Maximum / Minimum Working Height 4" / 10.2 cm
      Materials Aluminum Alloy
      Weight 1.1 lb / 498.95 g
      Packaging Info
      Package Weight 1.2 lb
      Box Dimensions (LxWxH)

      4.5 x 4 x 4

        Full Product Details

        Sold out

        Slik Pro CF-833 Tripod (Black)
        • $329.95
        Quick View

        Slik Pro CF-833 Tripod (Black)

        Camera Accessories

        • $329.95

        • Carbon Fiber Legs
        • 3-Position Leg Angle Locks
        • Reversible, Rapid Column
        • Reversible 1/4"-20 and 3/8"-16 Mount
        • Twist Locks, Interchangeable Rubber Feet

        The SLIK Pro CF-833 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 23.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 9.3". The SLIK Pro CF-833 Tripod provides a maximum height of 54.5" and 67.3" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

        Full Product Details

        Sold out

        Slik Pro CF-834 Carbon Fiber Tripod w/ PBH-635AS Ball Head & Quick Release Plate
        • $349.90
        Quick View

        Slik Pro CF-834 Carbon Fiber Tripod w/ PBH-635AS Ball Head & Quick Release Plate

        Photography

        • $439.90
        • $349.90

        The SLIK Pro CF-834 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 18.9" when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 7.5". The SLIK Pro CF-834 Tripod provides a maximum height of 52.2" and 65" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

        The SLIK PBH-635AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 13.1 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

        *Slik Pro CF-834 Tripod (Black):
        • Carbon Fiber Legs
        • 3-Position Leg Angle Locks
        • Reversible, Rapid Column
        • Reversible 1/4"-20 and 3/8"-16 Mount
        • Twist Locks, Interchangeable Rubber Feet
        *Slik PBH-635AS Ball Head with 6507 Quick Release Plate:
        • Non-Slip Surface
        • Built-In Bubble Level
        • 6507 Quick Release Plate
        • Aluminum-Alloy Construction
        • 1/4"-20 Folding-Wing Thumb Screw Mount
        • Arca-Type Compatible Clamp with Cam Lock
        • Compatible with tripods or support systems that feature a 3/8"-16 mount
        • Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
        • Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
        • The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
        • Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
        • Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
        • Secondary locking knob with knurled surface allows head to rotate 360°
        Slik CF-834 Specs
        General
        Load Capacity 15.4 lb / 6.99 kg
        Maximum Working Height 65" / 165.1 cm
        Max Height without Center Column 52.2" / 132.59 cm
        Minimum Working Height 7.5" / 19.1 cm
        Folded Length 18.9" / 48.01 cm
        Head Mount Type None
        Weight 3.4 lb / 1.54 kg
        Materials Carbon Fiber
        Bubble Level No
        Legs
        Leg Lock Type Twist-Lock
        Leg Positions 3 Positions
        Independent Leg Spread Yes
        Leg Sections 4
        Feet Features Rubber
        Center Column
        Center Column Features Ballast Hook
        Center Column Extension Type Rapid
        Packaging Info
        Package Weight 6 lb
        Box Dimensions (LxWxH) 29 x 5.5 x 5.5"
        Slik PBH-635AS Specs
        Head
        Head Type Ball Head
        Base Mount 3/8"-16 Female & 1/4"-20 with Bushing
        Camera Mounting Screw 1/4"-20 Male
        Number of Bubble Levels 1
        Friction Control Yes
        Independent Pan Lock Yes
        Pan & Tilt Range
        Vertical Tilt 90°
        Panning Range 360°
        General
        Load Capacity 13.1 lb / 5.94 kg
        Maximum / Minimum Working Height 4" / 10.2 cm
        Materials Aluminum Alloy
        Weight 1.1 lb / 498.95 g
        Packaging Info
        Package Weight 1.2 lb
        Box Dimensions (LxWxH)

        4.5 x 4 x 4

          Full Product Details

          Sold out

          Slik Pro CF-834 Tripod (Black)
          • $349.95
          Quick View

          Slik Pro CF-834 Tripod (Black)

          Camera Accessories

          • $349.95

          • Carbon Fiber Legs
          • 3-Position Leg Angle Locks
          • Reversible, Rapid Column
          • Reversible 1/4"-20 and 3/8"-16 Mount
          • Twist Locks, Interchangeable Rubber Feet

          The SLIK Pro CF-834 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 18.9" when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 7.5". The SLIK Pro CF-834 Tripod provides a maximum height of 52.2" and 65" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

          Full Product Details

          Sold out

          Slik Pro CF-933 Carbon Fiber Tripod
          • $419.95
          Quick View

          Slik Pro CF-933 Carbon Fiber Tripod

          Camera Accessories

          • $419.95

          • Twist Locks
          • Leg Sections: 3
          • Weight: 5.4 lb
          • Load Capacity: 22 lb
          • Maximum height: 80.3"
          • Minimum Height: 11.8"
          • Removable / Reversible Center Column

          The Pro CF-933 Carbon Fiber Tripod from Slik is a carbon fiber leg set that is lighter than aluminum and extremely tough due to the 8-layer construction. When fully extended, it reaches a height of 80.3", and it has a removable and reversible 14.9" center column. This leg set folds down to 29.2" and weighs just 5.4 lb, making it easy to pack ad travel with. The three leg sections are secured and loosened with twist locks. Because the legs do not rotate, all three leg stages may be unlocked at once by twisting the large rubber grips with one hand for fast setup. The PRO CF-933 has a generous load capacity of up to 22 lb, suitable for use with professional camera bodies and/or heavy lenses.

          Full Product Details

          Sold out

          Slik Pro CF-934 Carbon Fiber Tripod
          • $439.95
          Quick View

          Slik Pro CF-934 Carbon Fiber Tripod

          Camera Accessories

          • $439.95

          • Twist Locks
          • Leg Sections: 4
          • Weight: 5.2 lb
          • Minimum Height: 9.8"
          • Maximum height: 73.6"
          • Folded Length: 23.2"
          • Removable / Reversible Center Column

          The Pro CF-934 Carbon Fiber Tripod from Slik is a carbon fiber leg set that is lighter than aluminum and extremely tough due to the 8-layer construction. When fully extended, it reaches a height of 73.6", and it has a removable and reversible 12.7" center column. This leg set folds down to 23.2" and weighs just 5.2 lb, making it easy to pack ad travel with. The three leg sections are secured and loosened with twist locks. Because the legs do not rotate, all three leg stages may be unlocked at once by twisting the large rubber grips with one hand for fast setup. The PRO CF-934 has a generous load capacity of up to 22 lb, suitable for use with professional camera bodies and/or heavy lenses.

          Full Product Details

          Slik Pro Pod CF-834 Monopod
          • $129.95
          Quick View

          Slik Pro Pod CF-834 Monopod

          Camera Accessories

          • $129.95

          • Twist Locks
          • Wrist Strap
          • Rubber Foot
          • Reversible 1/4"-20 Mount
          • Carbon-Fiber Construction

          This Pro Pod CF-834 Monopod from Slik supports up to 15.4 lb and measures 19.7" when folded. It is constructed from carbon fiber, consists of four sections that utilize twist locks for rapid deployment, and can be positioned to a maximum height of 64.1". A rubberized cover along the top section provides a secure and comfortable grip while moving the monopod, and a rubber foot helps to enhance stability on a wide variety of surfaces. Cameras, lenses, sport optics, or accessories with 1/4"-20 female accessory threads can be directly connected to the mount on this monopod's top platform. A wrist strap is included for storage and transport.

          • Shipping

          ·         Shipping charges are automatically calculated for orders shipped within the Continental USA.

          ·         Orders shipped within the Continental USA are shipped via UPS Ground unless otherwise specified. We do offer other UPS services like Next Day Service as well as Two Day Rush Delivery Service.

          ·         Orders shipped to an international destination or to a USA territory are shipped via United States Postal Service (USPS) Insured or Express.

          ·         We do not take responsibility for the loss of packages shipped via USPS. However, we will make sure to take care of lost package claims.

          ·         Most orders received prior to 2:00 P.M. are shipped within the same business day.

          Full Product Details

          Sold out

          Slik SBH-400AS Ball Head - 618-824
          • $49.95
          Quick View

          Slik SBH-400AS Ball Head - 618-824

          Camera Accessories

          • $49.95

          • Ball Lock & Pan Lock
          • 8.8 lb Load Capacity
          • Weight: 9.7 oz
          • Low-Profile & Compact Head

          The SBH-400AS Ball Head from Slik is a low profile and compact ball head. Weighing just 9.7 oz, this ball head boasts an 8.8 lb load capacity, making it suitable for small to medium-size digital cameras. A pan locking knob enables you to pan the head a full 360°, and degree markings surround the base of the unit for stitching together panoramic photos. The head has a 90° notch for shooting in portrait orientation, and a bubble level is provided to assist you with composition. A quick-release plate is included, and the ball head's cam lock quick release system allows users to attach the camera from the top of the platform without sliding in or out of the grooves. The base of the unit features a 3/8"-16 tripod socket, and a 1/4"-20 thread adapter is included so you can mount the ball head on your tripod of choice.

          Full Product Details