All

• With an overall length of just 9.17??? and weight of just 3.5 oz, this microphone adds virtually no heft to the end of a fish pole or the top of a minicam. Through the use of an innovative Audio-Technica design, the interference tube of the BP4073 provides a narrow acceptance angle, effective for long-distance pickup. The highly directional mics offer low self-noise and are fully RoHS-compliant ??“ free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS). Features: Designed for use in broadcasting, film/TV production and theater sound reinforcement applications Direct-coupled, balanced output ensures a clean signal even in high-output conditions Innovative acoustic design provides same directivity as mics up to 50% longer Switchable 80 Hz hi-pass filter 151 dB SPL, with 10 dB pad (nominal) Noise: 13 dB SPL Dynamic Range (typical): 128 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 81 dB, 1 kHz at 1 Pa Phantom power Requirements: 48V DC, 4.8 mA typical Switches: Flat, roll-off; 10 dB pad (nominal) Weight: 99 g (3.5 oz) Dimensions: 233.0 mm (9.17") long, 21.0 mm (0.83") maximum body diameter Output Connector: Integral 3-pin XLRM-type Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8144 windscreen; two O-Rings; protective carrying case Audio-Technica Case Style: SG2

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• 2.4 GHz range - completely free from TV interference
• Automatic frequency selection for seamless, interference-free operation
• Extremely easy operation with instantaneous channel selection, sync, and set-up
• Includes ATW-R1100 receiver and ATW-T1001 UniPak transmitter with PRO 92cW headworn microphone.

• Audio-technica??™s system 10 Pro Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original system 10 but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted Remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels. Like all the products in the system 10 wireless family, The Pro Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time diversity sends the signal in multiple time slots to maximize immunity to Multipath interference. Space diversity uses two Antennas on each transmitter and receiver unit to maximize signal integrity. Each system 10 Pro Rack-Mount system includes an atw-rc13 receiver chassis with Rack-Mount adapters, one or two atw-ru13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two atw-t1001 unpack body-pack or atw-t1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays

• A lightweight yet feature-rich design that offers a simple, powerful solution for capturing high-resolution audio for video
• Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera??™s internal microphone
• Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
• Also comes equipped with a three-position adjustable attenuator (-20 dB, -10 dB, 0 dB) to capture even soft and very loud sound passages without distortion
• Switchable low-frequency roll-off reduces pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations
• Powered by a single AA battery for optimal performance with high max SPL
• Features an integral camera shoe mount that attaches quickly to DSLRs and shoe-equipped camcorders

• Digital 24-bit/48 kHz operation
• 2.4 GHz ISM band
• Automatic frequency selection
• Xlr and 1/4" Outputs
• Channel selection, sync, and setup

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• 2.4 GHz range - completely free from TV interference
• Automatic frequency selection for seamless, interference-free operation
• Extremely easy operation with instantaneous channel selection, sync, and set-up
• Includes ATW-R1100 receiver and ATW-T1001 UniPak transmitter with AT-GcW guitar/instrument input cable.

The Audio-Technica MT830mW Omni-Directional Condenser Lavalier Microphone is a subminiature condenser microphone intended to be worn on the clothing of performers for excellent yet unobtrusive sound pickup.

The wide-range capability of the MT830mW ensures clean, accurate reproduction with high intelligibility for lecturers, singers, stage and TV performers, as well as musical instruments. Its small size makes the MT830mW ideal for use in applications where minimum visibility is required.

Subminiature omnidirectional condenser microphone only, terminated for use with PRO 88W transmitter. 55" (1.4 m) cable. Includes clothing clip and windscreens. Features: Small size provides excellent yet unobtrusive sound pickup High intelligibility for lecturers, stage/TV performers and singers Wide-range capability ensures clean, accurate reproduction

Specifications:

Transducer: Condenser

Polar Pattern: Omnidirectional

Frequency Response: 30 Hz - 20 kHz

Dynamic Range (Typical): 107 dB, 1 kHz at Maximum

SPL Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa Maximum

Input Sound Level: 131 dB SPL, 1 kHz at 1% T.H.D

Power Requirements: Phantom: 9 - 52v (2 mA Typical)

Output Impedance: 200 ohms

Output Connectors: 3.5mm

Pad: No

Low Frequency Roll-Off: No

Dimensions (LxWxD): 0.62x0.33x0.19" (15.74x8.38x4.82mm) Weight: 0.05 oz. (1.3 g)

• Designed for studio, broadcast and mobile applications, and carefully crafted with key metal components for lasting durability
• Uses the same large-aperture drivers as ATH-M50x headphones, delivering exceptional clarity, extended frequency range, and accurate bass response
• Low-profile, closed-back, on-ear design provides excellent sound isolation and a great fit
• Memory foam earpads and headband provide excellent comfort and durability
• Comes with three interchangeable cables (1.2 m - 3.0 m coiled, 3.0 m straight, and 1.2 m straight ??“ each with a 3.5 mm (1/8") mini-plug)
• Also comes with a 6.3 mm (1/4") screw-on adapter and a protective carrying pouch

• The AT8691 camera shoe dual mount makes it easy to mount two ATW-R1700 System 10 digital wireless receivers to a camera??™s hot shoe, or to a tripod or other device with a ??" screw. Comes with 280 mm (11.0") AT8351 dual mono to stereo coiled cable (dual 3.5 mm mono mini-plugs to 3.5 mm stereo mini-plug), allowing you to use one receiver to capture left channel audio, the other to capture right channel audio and feed both into the camera??™s audio input.