All

• Compatible with THETA Z1 Dual 1" sensor spherical digital camera
• Protects both optical lenses
• Can be Used as additional support for use on flat surfaces.

• Supports 18 lbs (8.2kg)
• Mid-level Spreader
• Dual adjustable pan handles for greater control
• 75mm Claw Ball
• Double strut top leg sections enhance stability

The ProVista 7518 Tripod is designed for videographers who need a heavy-duty tripod for a variety of field, studio, educational, and industrial applications. It supports cameras weighing up to 18 pounds. The ProVista is a three-section aluminum tripod with a non-glare black anodized finish. Quick release leg locks are easy to use even in the cold. For fast setup, the locks flip open and close with only a half twist. The top-leg section of the tripod has double-strut construction for stability. A 75 millimeter claw ball adds mobility and stability to your shooting. The 3/8"-16 mounting screw will accept most professional tripod heads. The rubber feet provide traction on any surface, indoors and out. Maximum height for the ProVista is 64 inches, minimum height is 31 inches. Tripod weight without a head is 8 pounds.Matched up perfectly to the ProVista 7518 tripod is the FM18 Fluid Head, which can also hold up to 18 pounds. Designed for heavy-duty use with Mini DVs and large camcorders, offering fluid-smooth 360 panning and 90 up-and-down tilting. Separate, easy-grip knobs lock and unlock the panning and tilting mechanism.

Mid level spreader included adds additional support Rubber feet grab any surface. Non-glare black anodized finish Maximum Height - 64 Maximum Load - 18 lbs. Minimum Height - 28 Tripod Weight - 10 lbs. 3 oz. Includes FM18 Head Fluid head with 18 pound capacity ensures smooth operation. Sliding quick release plate system affords variable balance control. 2 adjustable removable pan handles provide easy maneuverability. Independent tilt

Q&A

I want put a slider onto the tripod and it requires me taking off the fluid head to put on the slider, How do I remove the fluid head?

How does your slider attach? The FM18 head has a 1/4 20 and a 3/8 16 thread on its own quick release plate.If you need to remove the head you must unscrew the rubber handle which hangs between the legs. Once this is remove the head can be removed with the ball claw attached to it. There will be some allen screws on the bottom of the ball claw... you can also remove these if necessary.
Answered by Tiffen Support on Jan 10, 2016

What is the size of the screw that attaches the camera to the quick release plate; 1/4 or a 3/8 ?

The screw is the standard tripod mount, 1/4 - 20. (1/4 inch, 20 thread per inch). Hope this helps. It's a great tripod.
Answered by David S. on Feb 18, 2015

Is this a true fluid head?

it sure feels like it. I've found it to always have good motion. 
By Josh Hayes on July 9, 2014

The rubber feet of the tripod is appropriate for use on the ground or in the sand?

This tripod will work well on firm ground. If you are using it in the mud or sand I would recommend placing it on something to keep it out of the mud or sand. You can use small squares of plywood, floor tiles also work well. This will keep your tripod stable and clean.
Answered by Tiffen Support on Jan 14, 2016

• Holds Your Lens Cap
• Prevents Losing Your Lens Cap
• Small & Convenient

• Three Aspherical Elements
• F-Mount Lens/DX Format
• Aperture Range: f/2.8 to f/22
• 16.6-30mm (35mm Equivalent)
• New modern and comfortable design for better handling
• New coating providing improved resolution and efficient flare management
• Constant size whatever the focal and focus for easier stabilizer calibration.

An updated classic, designed for more intuitive and interactive use, the Nikon F-mount Tokina atx-i 11-20mm f/2.8 CF is an ultra-wide zoom that is ideal for landscape, architecture, interior, and astrophotography applications. Its bright f/2.8 constant maximum aperture affords consistent brightness throughout the zoom range and benefits working in available lighting conditions.

The optical design incorporates a series of aspherical and low dispersion elements, which suppress a variety of aberrations for improved sharpness and clarity. Individual elements are also multi-coated to resist flare and ghosting for greater contrast and color accuracy when working in bright or backlit conditions. Complementing the optics, this lens features a One-Touch Focus Clutch Mechanism for fast-changing between AF and MF settings, and the internal focusing design is used for responsive focusing performance.

• Fits All Pentax Digital SLR Cameras
• Attaches to Strap Lugs & Tripod Socket
• Helps Avoid Hand Fatigue

The Sport Mount Chest Harness from Pentax contains a platform with a 1/4-20 mounting screw that attaches to the tripod socket of your camera. Two wide adjustable elastic webbing straps plus an additional strap that runs down your back provide balance and support for the harness. A strap with quick-release buckle fits around your chest securing the harness.

Proving the DSLR is still a highly capable tool, the Pentax K-3 Mark III marries contemporary imaging capabilities with the trusty and familiar design of an SLR. Taking the flagship spot in Pentax's APS-C lineup, the K-3 Mark III is characterized by a new 25.7MP BSI CMOS sensor, a high-density 101-point AF system, a revised pentaprism optical viewfinder, and an advanced SR II Shake Reduction System. As a Pentax, too, the K-3 Mark III is also distinguished by its robust physical construction and extensive weather sealing for working in harsh weather conditions and climates.

The K-3 Mark III's updated sensor and processing capabilities offer a blend of high-resolution stills performance with apt speed to suit a variety of shooting scenarios. Up to 12 fps continuous shooting is possible along with UHD 4K video recording. For stills, a new SAFOX 13 AF system features 101 phase-detection points for quick and accurate focusing performance with apt subject tracking capabilities.

Complementing the imaging, this camera relies on Pentax's attention to details and how cameras are handled and used, and as such features a tough and robust physical construction with an ergonomic design and intuitive controls. The improved optical viewfinder provides realistic and detailed eye-level viewing while the rear 3.2" 1.62m-dot touchscreen LCD offers easy control over settings and image review. The K-3 Mark III is also benefitted by dual SD memory card slots, both Wi-Fi and Bluetooth wireless interfaces, and a revised button design for more direct access to exposure and AF point control.

Here is what you get:

• Pentax K-3 Mark III DSLR Camera (Black)
• Pentax D-LI90(E) Lithium-Ion Battery (7.2V, 1860mAh)
• 2 x Triangular Ring
• AC-U2 USB Power Adapter and Power Plug
• I-USB166 USB Cable
• Finder Cap
• O-ST162 Strap
• FU Eyecup
• FK Hot Shoe Cover
• KII Body Cap
• 2P Sync Terminal Cap
• Protective Cover
• Battery Grip Connector Cover
• Limited 1-Year Warranty

Product highlights:

• 25.7MP APS-C BSI CMOS Sensor
• SAFOX 13 101-Point Phase-Detection AF
• 1.05x-Mag. Pentaprism Optical Viewfinder
• 3.2" 1.62m-Dot Touchscreen LCD
• Up to 12 fps Continuous Shooting
• 5-Axis SR II In-Body Shake Reduction
• UHD 4K30p Video Recording
• Pixel Shift Res., AA Filter Simulator
• Wi-Fi & Bluetooth; Dual SD Card Slots
• Weather-Sealed Magnesium-Alloy Body

Pentax K-3 III Specs

Imaging

Exposure Control

Video

Focus

Viewfinder

Monitor

Flash

Interface

Environmental

Physical

Packaging Info

• 600mm (35mm Equivalent)
• Fixed Aperture: f/8
• Catadioptric Telephoto Lens
• FUJIFILM X-Mount / APS-C Format
• Wide focus ring provides a smooth rotation range of 270°
• Catadioptric design and construction create a smooth and unusual donut-shaped.

The SZX 400mm f/8 Reflex MF Lens for FUJIFILM X from Tokina is a 400mm catadioptric optical design super-telephoto lens with a fixed f/8 aperture, which offers a compact alternative to standard telephoto lenses. It's lightweight and compact design fits easily inside a pocket or small bag and is suitable for travel, wildlife, and outdoor photography.

The SZX 400mm f/8 reflex lens features a T-Mount design, making it easily adaptable to a wide variety of camera systems. This lens includes an X-mount adapter.

• 3" heavy duty ball bearing wheels for smooth movement.
•  Attaches quickly and easily.
• Folds & Locks for easy storage and transport.
• Adjustable diameter to fit most tripods.
• Double Locking Wheels
• Open diameter 32"
• **10 Year Warranty and FREE Returns on all Redline Items**
  

What's In The Box

• Wireless Functionality with 4 Channels
• Full Manual and P-TTL Exposure Control
• Guide Number: 177' at ISO 100
• Effective Range: 2.6-26.2' at f/5.6
• Weather-Resistant Construction

• Neoprene material
• Help keep the camera afloat if dropped in water.
• Attaches to strap lug of Coolpix waterproof cameras.

The Nikon floating Strap is designed to be used with the rugged, waterproof AW series COOLPIX cameras when used in the water. While attached to the camera, the strap is designed to float, so if the user lets go of the camera it will not sink, but float on the water's surface so the camera can easily be retrieved; while you are swimming, surfing, or rafting. Even if you're walking along a stream and slip, the strap will keep the camera afloat and make it easier to retrieve. The neoprene material maintains buoyancy while engaging in any water sport.

• Designed to adjust brightly reflected light especially sunlight (reflected off of water or glass) and reduce unwanted glare
• Creates dramatic sky/cloud contrast and saturates colours without changing colour balance
• Mount rotates to control amount of effect
• Coatings applied to both surfaces to suppress reflection and increase light transmission
• For use with autofocus cameras and lenses

• Twist Locks
• Wrist Strap
• Rubber Foot
• Reversible 1/4"-20 Mount
• Carbon-Fiber Construction

This Pro Pod CF-834 Monopod from Slik supports up to 15.4 lb and measures 19.7" when folded. It is constructed from carbon fiber, consists of four sections that utilize twist locks for rapid deployment, and can be positioned to a maximum height of 64.1". A rubberized cover along the top section provides a secure and comfortable grip while moving the monopod, and a rubber foot helps to enhance stability on a wide variety of surfaces. Cameras, lenses, sport optics, or accessories with 1/4"-20 female accessory threads can be directly connected to the mount on this monopod's top platform. A wrist strap is included for storage and transport.

• Manual Focus
• Fixed Aperture: f/8
• Catadioptric Telephoto Lens
• F-Mount Lens/DX Format
• Wide focus ring provides a smooth rotation range of 270°
• Catadioptric design and construction create a smooth and unusual donut-shaped

The SZX 400mm f/8 Reflex MF Lens for Nikon F from Tokina is a 400mm catadioptric optical design super-telephoto lens with a fixed f/8 aperture, which offers a compact alternative to standard telephoto lenses. It's lightweight and compact design fits easily inside a pocket or small bag and is suitable for travel, wildlife, and outdoor photography.

The SZX 400mm f/8 reflex lens features a T-Mount design, making it easily adaptable to a wide variety of camera systems. This lens includes an F-mount adapter.