SKB

• Custom cute PE foam to fit the Blackmagic Pocket Cinema Camera 4K with a longer lens attached, lens hoods, two lenses, and accessories
• Unconditional Lifetime Warranty
• Ultra high-strength polypropylene copolymer resin
• Complete gasket seal makes this case absolutely watertight (MIL-STD-C4150J / IP67)

Description

This military-grade waterproof hard case was designed for photographers who just want to carry the essentials. The case interior features a custom cut, high-quality PE foam that provides space for a Blackmagic Design Pocket Cinema Camera 4K with lens attached, lens hood section, two lens slots, and an accessory compartment. A removable section of foam will allow for a longer lens to remain attached to the camera. Each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The size of each lens slot is 3" in diameter and 4.5" in depth, with all rings removed. The 3i-13096PC4K case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty.

• For 2014 or Later 27" iMac
• Custom Plush-Lined EPS Interior
• Room for Accessories
• Wheels & Pull-Handle

Safely transport your system with the iSeries Waterproof Custom 27" iMac Case from SKB. This case features a durable exterior and a custom plush-lined interior for not only the system, but also accessories such as the keyboard, mouse, and cables. It's also built with TSA-retrofittable trigger latches, quiet wheels, and a one-button pull handle for travelling convenience.

• Rugged all-in-one wireless system with high flexibility for Broadcast quality sound
• Easy to use and fast setup time
• Range: up to 100 meters/ 330 feet Up to 8 hours of operation time
• Excellent sound and construction quality
• Set Includes: EK 100 G4 Wireless Camera-Mount Receiver A: (516 to 558 MHz), SK 100 G4 Wireless Bodypack Transmitter, SKP 100 G4 Plug-On Transmitter, ME 2-II Omnidirectional Lavalier Microphone, Audio-Technica Omnidirectional Dynamic Microphone, SKB 3I0907-4-SWK iSeries Injection Molded Case for Sennheiser EW Wireless Mic Series

Description

Sennheiser EW 100 ENG G4 Wireless Microphone Combo System (A / 516 - 558MHz) The ew 100 ENG G4 Wireless Microphone Combo System is the latest addition to Sennheiser's Evolution family of wireless microphones. The UHF wireless microphone system features 1,680 tunable frequencies, 20 frequency banks and 16 frequency presets per bank. This package conveniently includes the EK 100 G4 camera mount receiver, SK 100 G4 bodypack transmitter with ME2 lavalier and SKP 100 G4 plug-in transmitter in one package.

Audio-Technica AT8004L Handheld Omnidirectional Dynamic Microphone (Long Handle) The AT8004L microphone is a rugged omnidirectional microphone designed for ENG style interviews, speech capturing, etc. The omnidirectional polar pattern is ideal for capturing surrounding ambiance or providing a "forgiving" pick-up area for talkers who tend to move and change positions. The transparent audio reproduction results in natural vocal reproduction and the internally shock-mounted element minimizes handling noise. Its 9.43" (239.5mm) long handle provides added reach for interviews and room for station ID flags. The AT8004L is an ideal solution for reporters, podium mounting etc.

SKB iSeries Military Standard Waterproof Sennheiser EW Wireless Mic System Case The iSeries Military Standard Waterproof Sennheiser EW Wireless Mic System Case from SKB is a compact, durable, and part of the iSeries Waterproof cases. This injection-molded military-standard waterproof case is constructed from a high-strength polypropylene copolymer resin and features a gasketed, water and dust proof, a submersible (IP67-rated) design that makes it resistant to corrosion and damage due to impact. This case also features stainless steel molded-in hinges, a trigger release latch system, a comfortable snap-down rubber over-molded cushion grip handle, and an automatic ambient pressure equalization valve (MIL-STD-648C).

• Pressure Relief Valve
• Molded-In Hinge and Padlock Holes
  
• Extending Handle with Low-Profile Wheels
• Padded Protection for Delicate Gear
• ThinkTank-Designed Photo Divider Insert
• UV/Solvent/Corrosion/Fungus Resistant
• Polypropylene Copolymer Resin Material
• IP67-Rated Dust and Waterproof

Made of injection-molded ultra-high-strength polypropylene copolymer resin, this SKB Cases I-Series 2011-10 Wheeled Utility Case is made to withstand the most extreme and demanding shipping, handling, and working conditions on the planet. The case is offered here with a ThinkTank-designed padded photo divider insert that is custom-made to fit the case's roomy 19.5 x 10.5 x 8" interior and features long and short removable and adjustable dividers that you can position to perfectly fit your gear. For complete protection, the case also has a convoluted egg-crate foam lid insert and an 8.5" thick foam base layer.

• Custom cut PE foam to fit two DSLR bodies with 24-70mm and 70-200mm lens attached, lens hoods, flash, batteries, and additional accessories
• Removable foam sections to fit camera bodies with or without battery grips, or pro-sized bodies
• Pull out handle and wheels
• Unconditional Lifetime Warranty
• Molded of ultra high-strength polypropylene copolymer resin

• Custom cut PE foam to fit the Sony A7R IV, A7 III, A7R III, or A7 series body with a 70-200 lens attached, lens hoods, two lens slots, and accessories
• Unconditional Lifetime Warranty
• Ultra high-strength polypropylene copolymer resin
• Resistant to corrosion and impact damage
• Molded-in hinge

This Military-Standard waterproof hard case was designed for photographers who just want to travel with their gear essentials. The interior features custom cut, high quality PE foam that includes space for a Sony A7R IV, A7 III, A7R III, or other A7 camera bodies with lens attached, lens hood section, two lens slots, and accessory pocket. A removable section of foam will allow a 70-200mm lens to stay attached to the camera, and each lens slot has three (3) half-inch removable rings to fit a variety of lenses. The 3i-13096A74 case provides the ultimate protection for essential photo gear and is backed by SKB's unsurpassed Lifetime Warranty. PLEASE NOTE: This listing is for a SKB case. The depicted camera and its equipment is solely for illustrative purposes, and sold separately.

• Fits XF405 or XF400
• Custom slots for two batteries, two memory cards, and remote
• Space for power supply and other accessories
• Ultra high-strength polypropylene copolymer resin construction
• Resistant to solvents, corrosion, and impact damage (MIL-STD 810G)

• Side Grip Handle
• Multiple Applications
• Rail-To-Rail Depth of 10.7"
• Three Vertical Rack Units
• Water-Resistant Gasket in Lid
• Holds "Rack-able" Equipment
• Steel Front & Rear Threaded Rails

The black 3U Roto Shallow Rack Case with Steel Rails from SKB is a rotationally-molded shallow rack case with multiple applications, including holding equipment such as computers or music players which are "rack-able" or which can be screwed into the case. This case has steel front and rear threaded rails with a rail-to-rail depth of 10.7" and three vertical rack units. There is a water-resistant gasket in the lid and a side grip handle.

• Virtually Indestructible
• 4-RU Rackmount System
• Waterproof Injection-Molded Shell
• Front and Rear Rack Rails for Security
• Quiet-Glide Wheels
• Adjustable Work Surface for Laptops
• TSA-Accessible Locking Trigger Latches
• Easy-To-Operate One-Button Pull Handle

The Injection-Molded 4-RU Studio Flyer Rack Case from SKB is a virtually indestructible waterproof injection-molded case that is lightweight and includes molded-in front and rear rack rails to provide better security and durability for studio equipment during travel. It can be used to store and transport your gear to and from events and gigs.

The 4-RU case's rackmounts measure 15" from the front rail to rear rail to accommodate deeper equipment. It also provides a 21 x 15.5" adjustable work surface with ample room for laptops or monitors and is equipped with a molded exterior pattern that stacks securely with all SKB Roto Racks for maximum transport convenience. Other features include improved quiet-glide wheels, an easy-to-operate one-button pull handle, and TSA-accessible locking trigger latches.

• Waterproof Case
• Removable Shock-Rack Cage
• 13" Rail-to-Rail Rack Depth
• Resists Damage from Impact and Corrosion
• Interior foam protection
• Molded-in hinges
• TSA Acceptable trigger release latch system
• Rubber over-molded cushion grip handles
• Built-in wheels and pull handle
• Ultrahigh-strength polypropylene copolymer resin case construction

The 2 RU SKB iSeries Injection-Molded 13" Fly Rack is a rolling flight- and shipping-friendly rack case with wheels that is designed to house rack-mountable equipment for musicians and audio engineers on tour and in studios, live stage applications, and mobile-recording setups. It features threaded rails in the front and back with a 13" rail-to-rail depth. TSA-compliant trigger-release latches provide dependable closure and can be secured with a padlock (available separately).

The polypropylene copolymer resin case is strong, waterproof, and resistant to dirt, dust, corrosion, and more. Its automatic pressure-equalization valve prevents damage caused by drastic changes in air pressure. The molded-in hinges contribute to the case's sleek appearance and add additional protection.

• Waterproof Case
• Removable Shock-Rack Cage
• 9" Rail-to-Rail Rack Depth
• Resists Damage from Impact and Corrosion
• Interior foam protection
• Molded-in hinges
• TSA Acceptable trigger release latch system
• Rubber over-molded cushion grip handles
• Built-in wheels and pull handle
• Ultrahigh-strength polypropylene copolymer resin case construction

The 2 RU SKB iSeries Injection-Molded 9" Fly Rack is a rolling flight- and shipping-friendly rack case designed to house rack-mountable equipment for musicians and audio engineers on tour and in studios, live stage applications, and mobile-recording setups. It features threaded rails in the front and back with a 9" rail-to-rail depth. TSA-compliant trigger-release latches provide dependable closure and can be secured with a padlock (available separately).

The polypropylene copolymer resin case is strong, waterproof, and resistant to dirt, dust, corrosion, and more. Its automatic pressure-equalization valve prevents damage caused by drastic changes in air pressure. The molded-in hinges contribute to the case's sleek appearance and add additional protection.

• Waterproof Case
• Removable Shock-Rack Cage
• 9" Rail-to-Rail Rack Depth
• Resists Damage from Impact and Corrosion
• Interior foam protection
• Molded-in hinges
• TSA Acceptable trigger release latch system
• Rubber over-molded cushion grip handles
• Built-in wheels and pull handle
• Ultrahigh-strength polypropylene copolymer resin case construction

The 3 RU SKB iSeries Injection-Molded 9" Fly Rack is a rolling flight- and shipping-friendly rack case designed to house rack-mountable equipment for musicians and audio engineers on tour and in studios, live stage applications, and mobile-recording setups. It features threaded rails in the front and back with a 9" rail-to-rail depth. TSA-compliant trigger-release latches provide dependable closure and can be secured with a padlock (available separately).

The polypropylene copolymer resin case is strong, waterproof, and resistant to dirt, dust, corrosion, and more. Its automatic pressure-equalization valve prevents damage caused by drastic changes in air pressure. The molded-in hinges contribute to the case's sleek appearance and add additional protection.

• Waterproof Case
• Removable Shock-Rack Cage
• 9" Rail-to-Rail Rack Depth
• Resists Damage from Impact and Corrosion
• Interior foam protection
• Molded-in hinges
• TSA Acceptable trigger release latch system
• Rubber over-molded cushion grip handles
• Built-in wheels and pull handle
• Ultrahigh-strength polypropylene copolymer resin case construction

The 4 RU SKB iSeries Injection-Molded 9" Fly Rack is a rolling flight- and shipping-friendly rack case designed to house rack-mountable equipment for musicians and audio engineers on tour and in studios, live stage applications, and mobile-recording setups. It features threaded rails in the front and back with a 9" rail-to-rail depth. TSA-compliant trigger-release latches provide dependable closure and can be secured with a padlock (available separately).

The polypropylene copolymer resin case is strong, waterproof, and resistant to dirt, dust, corrosion, and more. Its automatic pressure-equalization valve prevents damage caused by drastic changes in air pressure. The molded-in hinges contribute to the case's sleek appearance and add additional protection.

• Low profile handle, Limited Lifetime
• Waterproof gasket, rear access door
• Back lid mounted wheels, threaded steel rails
• Rear rack Rails included military-grade butterfly latches
• Stacks with SKB standard and shallow racks, one-touch pull handle

We've completely overhauled our 8U Roto rolling rack, incorporating an innovative new design that includes our new one-touch pull handle and back lid mounted wheels for easy transport. We've also updated the exteriors so new Roto rolling racks will easily stack with our existing standard and shallow racks. Four military grade butterfly latches secure each lid with an internal rubber gasket that keeps water out so sensitive electronics stay safe and secure in transport.