This SLIK PRO DXShort Tripod supports up to 15.4 lb and measures 10.8" when folded. Its 3-section legs each feature independent spread as well as flip locks for fast deployment, and can be positioned for a minimum height of 3.3" to a maximum height of 16.3".

Tripod heads, cameras, lenses, sport optics, or accessories that are compatible with a 3/8"-16 mount can be connected to the SLIK PRO DXShort Tripod. To enhance stability on a wide variety of surfaces, rubber feet are included at the end of each leg.

Here is what you get:

• Slik PRO DXShort Tripod
• Limited 3-Year Warranty

Product Highlights

• Load Capacity: 15.4 lb
• Maximum Height: 16.3"
• Minimum Height: 3.3"
• Folded Length: 10.8"
• Leg Sections: 3
• Weight: 1.8 lb
• Aluminum, Magnesium, Titanium Alloy Legs
• Flip Locks, Rubber Feet
• 3/8"-16 Mount

Slik PRO DXShort Specs

General

Load Capacity	15.4 lb / 6.99 kg
Maximum Working Height	16.3" / 41.4 cm
Minimum Working Height	3.3" / 8.4 cm
Folded Length	10.8" / 27.43 cm
Materials	Aluminum Alloy, Magnesium Alloy, Titanium Alloy
Weight	1.8 lb / 816.5 g

Legs

Leg Lock Type	Flip Lock
Independent Leg Spread	Yes
Leg Sections	3
Feet Features	Rubber

Packaging Info

Package Weight	2.105 lb
Box Dimensions (LxWxH)	15.45 x 4.55 x 4.45"

The SLIK Pro CF-834 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 18.9" when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 7.5". The SLIK Pro CF-834 Tripod provides a maximum height of 52.2" and 65" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

The SLIK PBH-635AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 13.1 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

*Slik Pro CF-834 Tripod (Black):

• Carbon Fiber Legs
• 3-Position Leg Angle Locks
• Reversible, Rapid Column
• Reversible 1/4"-20 and 3/8"-16 Mount
• Twist Locks, Interchangeable Rubber Feet

*Slik PBH-635AS Ball Head with 6507 Quick Release Plate:

• Non-Slip Surface
• Built-In Bubble Level
• 6507 Quick Release Plate
• Aluminum-Alloy Construction
• 1/4"-20 Folding-Wing Thumb Screw Mount
• Arca-Type Compatible Clamp with Cam Lock
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
• Secondary locking knob with knurled surface allows head to rotate 360°

The SLIK Pro CF-833 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 23.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 9.3". The SLIK Pro CF-833 Tripod provides a maximum height of 54.5" and 67.3" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

The SLIK PBH-635AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 13.1 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

*Slik Pro CF-833 Tripod (Black):

• Carbon Fiber Legs
• 3-Position Leg Angle Locks
• Reversible, Rapid Column
• Reversible 1/4"-20 and 3/8"-16 Mount
• Twist Locks, Interchangeable Rubber Feet

*Slik PBH-635AS Ball Head with 6507 Quick Release Plate:

• Non-Slip Surface
• Built-In Bubble Level
• 6507 Quick Release Plate
• Aluminum-Alloy Construction
• 1/4"-20 Folding-Wing Thumb Screw Mount
• Arca-Type Compatible Clamp with Cam Lock
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
• Secondary locking knob with knurled surface allows head to rotate 360°

The SLIK Pro CF-733 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 11 lb and measures 22.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 8.3". The SLIK Pro CF-734 Tripod provides a maximum height of 52" and 65.9" with the column fully raised.

Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

The SLIK PBH-535AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 11 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

*Slik Pro CF-733 Tripod (Black):

• Carbon Fiber Legs
• 3-Position Leg Angle Locks
• Reversible, Rapid Column
• Reversible 1/4"-20 and 3/8"-16 Mount
• Twist Locks, Interchangeable Rubber Feet

*Slik PBH-535AS Ball Head with 6507 Quick Release Plate:

• Non-Slip Surface
• Built-In Bubble Level
• 6507 Quick Release Plate
• Aluminum-Alloy Construction
• 1/4"-20 Folding-Wing Thumb Screw Mount
• Arca-Type Compatible Clamp with Cam Lock
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
• Secondary locking knob with knurled surface allows the head to rotate 360°

Designed for content creators both in the studio and in the field, the Slik Creator's Kit includes three popular Slik products that work well together as a complete support system for creators both in the studio and in the field. This kit comes with clamp, slide arm II, and SBH-400AS ball head. Slik Creator's Clamp offers creators maximum flexibility in their settings. This universal clamp is ideal for connecting cameras, phones, tablets, or other small studio accessories up to 4.4 pounds. with slide post or up to 11 lbs. Direct attachment to the clamp port. Sliding Arm II is a universal mini-boom that works with almost any tripod that may have the head removed. It allows creators to access multiple unique angles and viewpoints not possible with a traditional tripod and head setup. The Slik SBH-400AS Professional Ball Head is a lightweight, low-profile head with a separate pan lock knob. Low-profile quick-release plates can be left in-camera and not get in the way of vertical shooting.

Here is what you get:

• Creator Kit
• Creator's Clamp
• Sliding arm II
• Ball head SBH-400AS

Product Highlights

• Universal clamp attaches to anything up to 3 '' wide
• Reversible surface adapter - fits flat and round surfaces
• 16.9 '' sliding post allows up or down mobility
• Removable ball head adapter helps attach up to 11.0 lbs
• Two accessory ports to attach a second accessory

Universal clamp that attaches to anything up to 3 '' wide. Reversible surface adapter: fits flat and round surfaces. The 17 '' sliding post allows up or down mobility. Removable Ball Head Adapter - Attaches up to 13.0 lbs directly to the clamp. Accessory ports: connect a second accessory: light, phone, etc. Includes: clamp, slide bar, head adapter, thread adapter, hex key not included

The Slik Creator Clamp provides creators with maximum flexibility in their setups. This universal clamp is ideal for attaching cameras, phones, tablets, or other small studio accessories up to 4.4 lbs. with the slide post or up to 11 lbs. Attaches directly to the clamping port.

Use the clamp to attach your accessories to anything up to 3 '' wide. The reversible surface adapter allows you to clamp flat and round surfaces such as desks, rails, posts or branches. An included hex key allows you to quickly convert from flat to round surfaces.

Equipped with the clamp is a removable 16.9 '' slide post to move your camera up and down or extend it from the center of the fulcrum. The pole comes with a 20 '' U1 / 4 thread to mount on almost any ball head, as well as a U3 / 8 '' thread adapter just in case. The two accessory ports allow you to connect a second accessory to the clamp.

The included ball head adapter allows you to remove the slide post and attach a heavier camera setup directly to the clamp. The clamp is easy to set up and use with touch knobs and the lightweight design makes it easy to carry.

• Ball Lock & Pan Lock
• 8.8 lb Load Capacity
• Weight: 9.7 oz
• Low-Profile & Compact Head

The SBH-400AS Ball Head from Slik is a low profile and compact ball head. Weighing just 9.7 oz, this ball head boasts an 8.8 lb load capacity, making it suitable for small to medium-size digital cameras. A pan locking knob enables you to pan the head a full 360°, and degree markings surround the base of the unit for stitching together panoramic photos. The head has a 90° notch for shooting in portrait orientation, and a bubble level is provided to assist you with composition. A quick-release plate is included, and the ball head's cam lock quick release system allows users to attach the camera from the top of the platform without sliding in or out of the grooves. The base of the unit features a 3/8"-16 tripod socket, and a 1/4"-20 thread adapter is included so you can mount the ball head on your tripod of choice.

• Non-Slip Surface
• Built-In Bubble Level
• 6507 Quick Release Plate
• Aluminum-Alloy Construction
• 1/4"-20 Folding-Wing Thumb Screw Mount
• Arca-Type Compatible Clamp with Cam Lock
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
• Secondary locking knob with knurled surface allows the head to rotate 360°

The SLIK PBH-535AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 11 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

• Non-Slip Surface
• Built-In Bubble Level
• 6507 Quick Release Plate
• Aluminum-Alloy Construction
• 1/4"-20 Folding-Wing Thumb Screw Mount
• Arca-Type Compatible Clamp with Cam Lock
• Compatible with tripods or support systems that feature a 3/8"-16 mount
• Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount
• Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
• The ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
• Large, primary locking knob allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
• Knurled friction knob on the opposite side of the primary locking knob applies variable tension on the ball-and-socket joint's movements
• Secondary locking knob with knurled surface allows head to rotate 360°

The SLIK PBH-635AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 13.1 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4"-20 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included 6507 Quick Release Plate. The quick-release plate can be attached or removed from the Arca-Type clamp located at the top of the head's ball-and-socket joint by pulling the clamp's integrated cam lock lever, which also allows the plate to be reattached. The quick-release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint's movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.

• Twist Locks
• Leg Sections: 4
• Weight: 5.2 lb
• Minimum Height: 9.8"
• Maximum height: 73.6"
• Folded Length: 23.2"
• Removable / Reversible Center Column

The Pro CF-934 Carbon Fiber Tripod from Slik is a carbon fiber leg set that is lighter than aluminum and extremely tough due to the 8-layer construction. When fully extended, it reaches a height of 73.6", and it has a removable and reversible 12.7" center column. This leg set folds down to 23.2" and weighs just 5.2 lb, making it easy to pack ad travel with. The three leg sections are secured and loosened with twist locks. Because the legs do not rotate, all three leg stages may be unlocked at once by twisting the large rubber grips with one hand for fast setup. The PRO CF-934 has a generous load capacity of up to 22 lb, suitable for use with professional camera bodies and/or heavy lenses.

• Twist Locks
• Leg Sections: 3
• Weight: 5.4 lb
• Load Capacity: 22 lb
• Maximum height: 80.3"
• Minimum Height: 11.8"
• Removable / Reversible Center Column

The Pro CF-933 Carbon Fiber Tripod from Slik is a carbon fiber leg set that is lighter than aluminum and extremely tough due to the 8-layer construction. When fully extended, it reaches a height of 80.3", and it has a removable and reversible 14.9" center column. This leg set folds down to 29.2" and weighs just 5.4 lb, making it easy to pack ad travel with. The three leg sections are secured and loosened with twist locks. Because the legs do not rotate, all three leg stages may be unlocked at once by twisting the large rubber grips with one hand for fast setup. The PRO CF-933 has a generous load capacity of up to 22 lb, suitable for use with professional camera bodies and/or heavy lenses.

• Carbon Fiber Legs
• 3-Position Leg Angle Locks
• Reversible, Rapid Column
• Reversible 1/4"-20 and 3/8"-16 Mount
• Twist Locks, Interchangeable Rubber Feet

The SLIK Pro CF-834 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 18.9" when folded. Each of its 4-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 7.5". The SLIK Pro CF-834 Tripod provides a maximum height of 52.2" and 65" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

• Tension Control
• Dual Bubble Levels
• Portrait Angle Selector
• Arca-Type Compatible
• 360° Pan with Independent Pan Lock

The PBH-45LP Low Profile Ball Head with Arca-Type Quick Release Plate from Slik provides convenience and security in a compact form factor. Its sleek design lacks meddlesome handles and is easy to pack and carry for travel and location photography. The machined aluminum construction has a generous load capacity of 44 lb and has two U-shaped drop notches that allow greater flexibility in shifting 90-degrees for horizontal and vertical orientations. The tension adjustment feature prevents large camera setups to be positioned smoothly without the risk of dropping. The independent pan knob allows full 360-degree rotation for multi-stitched panoramas, and the degree marker scale on the panning base assists in determining precise pan movement. The integrated Arca-type quick release receiver features a built-in shoe stopper to prevent the camera from falling off the tripod and dual spirit levels for precision positioning.

• Carbon Fiber Legs
• 3-Position Leg Angle Locks
• Reversible, Rapid Column
• Reversible 1/4"-20 and 3/8"-16 Mount
• Twist Locks, Interchangeable Rubber Feet

The SLIK Pro CF-833 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 15.4 lb and measures 23.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 9.3". The SLIK Pro CF-833 Tripod provides a maximum height of 54.5" and 67.3" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.

• Carbon Fiber Legs
• 3-Position Leg Angle Locks
• Reversible, Rapid Column
• Reversible 1/4"-20 and 3/8"-16 Mount
• Twist Locks, Interchangeable Rubber Feet

The SLIK Pro CF-733 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 11 lb and measures 22.6" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 8.3". The SLIK Pro CF-734 Tripod provides a maximum height of 52" and 65.9" with the column fully raised.

• Twist Locks
• Wrist Strap
• Rubber Foot
• Reversible 1/4"-20 Mount
• Carbon-Fiber Construction

This Pro Pod CF-834 Monopod from Slik supports up to 15.4 lb and measures 19.7" when folded. It is constructed from carbon fiber, consists of four sections that utilize twist locks for rapid deployment, and can be positioned to a maximum height of 64.1". A rubberized cover along the top section provides a secure and comfortable grip while moving the monopod, and a rubber foot helps to enhance stability on a wide variety of surfaces. Cameras, lenses, sport optics, or accessories with 1/4"-20 female accessory threads can be directly connected to the mount on this monopod's top platform. A wrist strap is included for storage and transport.

• Carbon Fiber Legs
• Twist Locks, Rubber Feet
• 3-Position Leg Angle Locks
• Reversible, Rapid Column
• Reversible 1/4"-20 and 3/8"-16 Mount

The SLIK Pro CF-635 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 6.6 lb and measures 14.6" when folded. Each of its 5-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet help to enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 3.5". The SLIK Pro CF-635 Tripod provides a maximum height of 44.1" and 51.6" with the column fully raised.

• Reversible, Rapid Column
• 3-Position Leg Angle Locks
• Carbon Fiber Legs
• Leg Sections: 3, Weight: 2.1 lb
• Folded Length: 21.3"
• Max Height: 64.2", Min Height: 4.9"
• Reversible 1/4"-20 and 3/8"-16 Mount

The SLIK Pro CF-633 Tripod is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 6.6 lb and measures 21.3" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet help to enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 4.9". The SLIK Pro CF-633 Tripod provides a maximum height of 48.8" and 64.2" with the column fully raised. Tripod heads, cameras, lenses, or sport optics with 1/4"-20 or 3/8"-16 female accessory threads can be directly connected to the reversible mount on top of the tripod's center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.

• Circular quick-release platform with two-stage safety detachment.
• Dual-axis bubble levels recessed in a quick release base allow easy leveling of the camera once attached.

The Slik 700DX Pro 3-Way Pan/Tilt Head is the head that originally comes supplied with the 700DX tripod. Made from solid, precision-machined aluminum this all-metal head has the strength and durability to handle up to a 4x5 field camera or a long telephoto lens such as a 300mm f/2.8 or 80-400mm zoom lens.

• 62.6 in. Maximum Height
• Lightweight Carbon fiber
• Compact 18.7 in. Folded length
• Reversible column for low-angle shooting
• 6.6 lb Load capacity, weighs only 2.0 lb

• Comes supplied with a 2-way pan head with a pan handle to make moving a camera mounted on the tripod easier
• Less than 8 inches long when packed up and weighs less than a pound
• The Mini Pro V can also be used as a chest-pod by raising the center column half way or more and placing the legs against your chest to stabilize the camera
• Has suction cup at bottom of center column for extra stability
• Compact and light-weight, while still sturdy

Max. Operating Height: 9"

Min. Operating Height: 6.1"

Max. Center Column Ext.: 1.8"

Center Column Type: Center Column

Folded Length: 7.9"

Weight: 0.8 lbs

Number of Leg Sections: 2

Max. Load: 2.7 lbs

Leg Lock Type: Twist Lock

Leg Tip: Rubber Foot

Description

The SLIK MINI PRO V has an easy-to-use 2-way pan head with simple one handle operation for locking and unlocking the head as well as positioning the camera fast and easy. Just twist the handle to loosen the head, point the camera to frame your subject and twist the handle in the other way to lock the head and camera in position, simple.

When retracted and closed, the SLIK MINI series tripods are about the size of standard telephoto lens, meaning they can be carried in your camera bag all the time so tripod support is always at hand! Besides its traditional use as a tripod, the SLIK MINI PRO III has another great feature, the ability to use the tripod as a “Chest-Pod” camera support.

To use it as a chest-pod, first loosen the locking collar around the center column, pull out (raise) the center column at least one inch and tighten. Then, with the legs spread, place the feet of the legs against your upper chest. Loosen the tripod head and position the camera so you can see through the viewfinder comfortably. This will better stabilize the camera and help avoid image degrading “camera shake.”

• Supports up to 19.8 lb
• Push-and-pull center column for rapid camera, lens, or sport optic positioning
• Center column is multi-sectional, allowing it to be converted to a shortened center column that allows the tripod to be set at a minimum height of 25.4", or16.1" when the column is shortened
• Tripod can be set to a maximum height of 60.0", 65.8" when the column is shortened as well as fully raised, and 75.0" with the complete column fully raised
• Column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
• Legs each feature three sections, an independent spread, a 3-position angle lock, and a flip lock for rapid deployment
• Legs can be locked at 16°, 40°, or 65° angles
• Foam covers on each of the legs provide a secure and comfortable grip
• Rubber feet for stability
• 3-way, pan-and-tilt head can be rotated 360°, and tilted 90° backwards or forwards, as well as sideways for portrait orientation
• Rotation, backwards and forwards tilt, as well as portrait orientation tilt each function independently of each other and can be locked into place
• Weighs 7.1 lb, measures 29.9" when folded

Description

This titanium-colored, SLIK Pro 700 DX Tripod with 700 DX 3-Way, Pan-and-Tilt Head supports up to 19.8 lb, measures 29.9" when folded, and includes a quick release plate. Each of its 3-section legs features an independent spread, a 3-position angle lock, and flip locks for fast deployment. The included push-and-pull, rapid center column is multi-sectional, which allows it to be converted to a shortened center column. This feature permits a minimum height of 25.4" or 16.1" when the center column is shortened. The SLIK Pro 700 DX Tripod provides a maximum height of 60.0", 65.8" with its center column shortened as well as fully raised, and 75.0" with the complete column fully raised.

Cameras, sport optics, or camcorders that are compatible with a 1/4"-20 mount can be connected to the quick release plate, which is secured to the tripod's pan-and-tilt head using a quick release cam lock. The head can be rotated 360°, and tilted 90° backwards or forwards, as well as sideways for portrait orientation. Each of these three movements function independently of each other and can be locked into place.

For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them. Foam covers on each of the legs provide a secure and comfortable grip while moving the tripod, and rubber feet help to enhance stability on a wide variety of surfaces.